power
 
MEDIUM VOLTAGE CABLE ACCESSORIES

power

 

Designing and production of power cable accessories, joints and terminations, has been the specialty of our company since 1981. Elcon Megarad focuses on customer-made designs to meet specific requirements based on material, installation procedures, specifications and standards.

 

ELCOTERM GLM --63/E

Heat shrinkable medium voltage (max 36 kV) transition joint between a three core, separated lead sheaths, radial electric field, paper insulated cable and three single core XLPE or EPR insulated cables. Copper or aluminum conductors. Cable connectors are not included.

 

ELCOTERM GLM --66/E

Heat shrinkable medium voltage transition joint between either a three core - lead sheathed and belted- non radial electric field - paper insulated cable (max 17.5 kV) or a three core - lead sheated - each core shielded, radial electric field - paper insulated cable (max 36 kV) and three single core XLPE or EPR insulated cables. Copper or aluminum conductors. Cable connectors are not included.

 

ELCOTERM GLM --75/EZ

Heat shrinkable medium voltage transition joint between either a three core - lead sheathed and belted - non radial electric field - paper insulated cable (max 17.5 kV) or a three core - lead sheathed - each core shielded, radial electric field - paper insulated cable (max 36 kV) and a three core XLPE insulated, wire or tape screened, armored cable. Copper or aluminum conductors. Steel canister included for cable amour restore. Cable connectors are not included.

 

ELCOTERM GLM --76/EZ

Heat shrinkable medium voltage (max 36 kV) transition joint between a three core, separated lead sheath, radial electric field, paper insulated cable and a three core XLPE insulated, wire or tape screened, armored cable. Copper or aluminum conductors. Steel canister included for cable amour restore. Cable connectors are not included.

 

ELCOTERM GLT --65/E

Heat shrinkable medium voltage (max 36 kV) transition joint between a three core, armored, XLPE insulated cable, and three single core XLPE insulated cables. Copper or aluminum conductors. Wire or tape screened. Cable connectors are not included.

 

ELCOTERM TIS --82/E

Heat shrinkable medium voltage (max 36 kV) indoor termination for single core, EPR or XLPE insulated, wire or tape screened cable, without amour*. Copper or aluminum conductor. Three terminations per kit. Cable lug not included.

 

ELCOTERM TIS --82/TZ

Heat shrinkable medium voltage (max 36 kV) indoor termination for three core, EPR or XLPE insulated, wire or tape screened, armored or not armored cable. Copper or aluminum conductors. Cable lugs not included.

 

ELCOTERM TES --84/E

Heat shrinkable medium voltage (max 36 kV) outdoor termination for single core, EPR or XLPE insulated, wire or tape screened cable, without amour*. Copper or aluminum conductors. One termination per kit. Cable lug not included.

 

ELCOTERM TES --84/TZ

Heat shrinkable medium voltage (max 36 kV) outdoor termination for three core, EPR or XLPE insulated, wire or tape screened, armored or not armored cable. Copper or aluminum conductors. Cable lugs not included.

 

ELCOTERM TIC --56/E

Heat shrinkable medium voltage indoor termination either for three core - lead sheathed - individual screen - radial electric field- paper insulated cable (max 36 kV), or for three core - lead sheathed and belted - non radial electric field - paper insulated cable (max 17.5 kV). Cables armored or not armored. Copper or aluminum conductors. Provided with semi conductive cable break-out. Common earthling system. Cable lugs not included.

 

ELCOTERM TEC --56/E

Heat shrinkable medium voltage outdoor termination either for three core - lead sheathed - individual screen - radial electric field- paper insulated cable (max 36 kV), or for three core - lead sheathed and belted- non radial electric field - paper insulated cable (max 17.5 kV). Cables armored or not armored. Copper or aluminum conductors. Provided with semi conductive cable break-out. Common earthling system. Cable lugs not included.

power
Heat Shrinkable Straight Through Joints
power ELCOTERM GLS-85/E
power ELCOTERM GLS-75/E
power ELCOTERM GLS-75/EZ
power ELCOTERM GLC-63/EZ
Heat Shrinkable Transition Joints
power ELCOTERM GLM --63/E
power ELCOTERM GLM --66/E
power ELCOTERM GLM --75/EZ
power

ELCOTERM GLM --76/EZ

power

ELCOTERM GLT --65/E

Heat Shrinkable Terminations
power

ELCOTERM TIS --82/E

power

 ELCOTERM TIS --82/TZ

power

 ELCOTERM TES --84/E

power ELCOTERM TES --84/TZ
power ELCOTERM TIC --56/E
power ELCOTERM TEC --56/E
COLD SHRINKABLE ACCESSORIES
power ECOLD TIS --73P/E
power ECOLD GLS -- 87/EE
power ECOLD TES --72P/E
 
power
 
 
 
LOW VOLTAGE CABLE ACCESSORIES

power-conceptElcon’s production follows three basic steps:

 

DESIGN:  On the basis of technical specification required by the customer, the cable accessory kit is designed, including a bill of components and installation instructions.

 

TESTING:  In this stage the kit is replaced and installed on the cable.  Then, modified or approved according to results.  In our H.V. laboratory it is possible to carry out testing according to any IEC, CENELEC, or IEEE standards.

 

ASSEMBLY: Once the accessory has passed the tests and has been approved, the kit is assembled according to the bill of components.  Number of components is a kit varies form a few Items, in low voltage cable accessories, to 30-40 items, for instance in 36kV three core armoured cable joint kits.

 

 

HEAT SHRINKABLE JOINTS

 

ELCOTERM GLS 015-/E

Heat shrinkable joint kit for low voltage (max 1kV), 4-core plastic insulated power cable without armour. Kit includes, 4 heat shrinkable tubes for connectors insulation and one external to re-build the cable jacket. Cable connectors are not included.

 

ELCOTERM GLS 017-/4C/E

Heat shrinkable joint kit for low voltage (max 1kV), 4-core plastic insulated power cable with armour. Kit includes, 4 heat shrinkable tubes for connectors insulation, a stainless steel canister to restore the cable armour, and one external tube to re-build the cable jacket. Cable connectors are not included. Steel canister included.

 

HEAT SHRINKABLE TERMINATIONS

 

ELCOTERM TIS 015-/T / ELCOTERM TES 015-/T

Heat shrinkable termination kits for low voltage (max 1kV), 4-core plastic insulated, without armour, power cables; indoor (TIS) and outdoor (TES) versions are available. Kit includes, a 4 ways cable breakout and a medium wall heat-shrinkable tube for each cable core. Cable lugs are not included.

 

ELCOTERM TIS 015-/TZ / ELCOTERM TES 015-/TZ

Heat shrinkable termination kits for low voltage (max 1kV), 4-core plastic insulated, with armour, power cables; indoor (TIS) and outdoor (TES) versions are available. Kit includes, a 4 ways cable breakout and a medium wall heat shrinkable tube for each cable core. Cable lugs are not included. Earthing kit included.

 

RESIN JOINTS

 

ELCOBLOK GLU 011-/E

Cast polyurethane resin straight joint insulation kit for low voltage (max 1kV) multi-core plastic insulated cables, without armour*. Cable connectors are not included.

 

ELCOBLOK GDU 011-/E

Cast polyurethane resin 30° branch joint insulation kit for low voltage (max 1) multi-core plastic insulated cables, without armour*. Cable connectors are not included.

 

ELCOSOFT GDR 011-/E

Re-enterable resin 30° branch joint insulation kit for low voltage (max 1kV) multi-coreplastic insulated cables, without armour*. Cable connectors are not included.

 

ELCOBLOK GTU 014-/E

Cast polyurethane resin 90° branch joint insulation kit for low voltage (max 1kV) multi-core plastic insulated cables, without armour*. Cable connectors are not included.

 

power-concept
Heat Shrinkable Joints
power-concept ELCOTERM GLS 015-/E
power-concept ELCOTERM GLS017-/4C/E
Heat Shrinkable Terminations
power-concept ELCOTERM TIS 015-/T
power-concept ELCOTERM TES 015-/T
power-concept ELCOTERM TIS 015-/TZ
power-concept ELCOTERM TES 015-/TZ
Resin Joints
power-concept ELCOBLOK GLU 011-/E
power-concept ELCOBLOK GDU 011-/E
power-concept ELCOSOFT GDR 011-/E
power-concept ELCOBLOK GTU 014-/E
TUBES & SHAPES
TAPES & RESINS
 
power-concept